BOW GUIDE
The bow guide is designed to align and center the boat in the slip while offering protection to the keel and gunwale — protecting your boat from contact with the dock.
· Self-centering for boat or PWC
· Durable UV-resistant polyethylene
· Bull-nosed top to prevent “slamming” on the dock
Recommended For: Most docks Commonly used for V-Hull boats and PWC
Technical Specifications: UV Protected Black Polyethylene Width: 25.729″
Height: 13.473”
Thickness Max: 6”
Corner Bumper™
Longer life with rounded corners and UV-resistant polyethylene
· Push-out center to wrap around corner uprights on covered docks
UltraFender™
The ultimate in protection, this 48 x 23" bumper is perfect for your gas, transient and premium dock space. Heavy duty polyethelyne with a bull-nose to help prevent the boat from slamming onto the dock. Match it up with the corner bumper for a total protection experience. (With the many types of docks and mooring options mounting hardware is not included.)
· Perfect for gas and premium docks
· Bull-nosed top to prevent “slamming” on docks
· Family design
HydroFender™
Flexibilty in protection best describes the UltraFender. A more versitle, higher quality solution to rub rail this UV-resistant polyethylene fender easily mounts to a traditional 2 x 6 headers on your dock. Roughly four feet in length it bends in the middle giving you the ability to inside or ouutside corners and seperates into two pieces for increased flexibility. Like our other boat and dock protection products the HydroFender is bull-nosed to help prevent slamming on the dock. (With the many types of docks and mooring options mounting hardware is not included.)
· Step-up edging alternative for traditional rub rail
· Bull-nosed to prevent “slamming” on the dock
· Easily separates into two sections for sizing
· Designed to easily attach to a 2×6 header (5.5″ flat back)
HYDROGUARD
Absorbs the Impact. Protects the Boat.
HydroGuard prevents damage to the hull of the boat. Engineered with non-marring molded polyethylene, the HydroGuards absorb the impact when contact is made.
Recommended For:
- Used on any UL2 from 4400 to 32,000 boat lift
- Older boat lift models including UL1 and L model lifts with vertical angles
Technical Specifications:
- UV Protected Black Polyethylene
- Width: 6 ¼”
- Height: 33 11/16”
- Thickness: 3 9/16”
CENTERING GUIDE
Boat lift centering guides assist in docking the boat and centering the craft over the hoist for proper and secure lifting. They vary in size from 6’ to 9’ and are constructed of the hot-dipped galvanized steel frame which is covered with a soft pliable PVC cover for protection.
Recommended For: Fits most lifts. Commonly used with 10,000 lbs. and above or extra wide slips
Technical Specifications:
UV Protected Black Polyethylene
Width: 20.97” (18.7” Each Side 90 Degrees From Each Other)
Height: 20.97”
Thickness: 2”
PLANK KIT
Easy & Secure Access to the Your Boat.
HydroHoist™ Plank Kit is the latest innovation in boat and dock protection from the leader in the boat lift industry, providing better access to your boat and added convenience for cleaning the hull or installing the cover.
Recommended For:
- Improved strength and aesthetics
- Aluminum anti-skid walk board, no lumber
- 50% less dead load on the hoist results in greater lifting capacity
- Compatible with UL2 and Front Mount boat lift models
- 12″ wide walk area — multiple units can be combined in wide slips
Technical Specifications:
- Improved strength and aesthetics
- Aluminum anti-skid walk board, no lumber
- 50% less dead load on the hoist results in greater lifting capacity
- Compatible with UL2 and Front Mount boat lift models
- 12″ wide walk area — multiple units can be combined in wide slips
